MMC009 – MMC-E2000 FFS Series of Packaging Machine

Interested in this product?

If you are interested in this product, or similar, get in touch now.

Product Description

MMC009 – MMC-E2000 FFS Series of Packaging Machine

This machine is able to accommodate various sizes and requirements in the pillow pack format. This machine can be equipped with various filling systems to allow for many types of raw materials.

Machine Parameters

The filling operation is achieved using either a volumetric cup discharge system in the case of granules or a high accuracy volumetric pump in the case of liquids or pastes. For powders, we use an augur screw system designed precisely for the powder requiring filling.

The operation of the machine is controlled via a computerized operator interface. All the machine parameters are set through this interface. Bag length can be automatically controlled via a film registration eye. Precise bag length and registered cutting is assured.

The machine has an electronic speed controller and as such speed control is precise. The machine is manufactured from a combination of materials that are suited to the operation design i.e.: Aluminium, stainless steel and engineering plastics. Sealed bearings are incorporated in the jaw assembly and no lubrication is required.

Model Variations

MMC-E2000 Standard MMC Model

  • Stainless steel outer frame
  • Nickel-plated internal gear system
  • High-temperature bearings used on all sealing rollers
  • Roller tension control using temperature resistant knobs
  • High-quality door hinges and locks
  • Electronic speed control
  • Remote operator panel for easy operator setting
  • Electrical panel with easy swing open access
  • Main film handling carriage with film drive and double mounting
  • Parameter setting screen

Advantages

  • Film frame holds both side of reel, allowing high stability of film
  • Film drive motor incorporated to remove film breakage even on weak films
  • Operator panel easy accessible to allow for best positioning by the operator
  • Vertical seal mechanism is keyed to prevent swivelling during setting
  • Machine speed adjusted by single hand speed switch
  • Volumetric cups are inserted by fast change over system
  • Main electrical panel is mounted to open allowing for easy access by maintenance
  • Cut off blades are guarded for operator safety
  • Filling mechanism can be disengaged for setup
  • Spill tray under filling system to stop product contaminating machine
  • Easy removal of former shoulder for quick change overs

Machine Specifications

MODEL

FILL RANGE

OUTPUT U/M

BAG SIZE (MM)

POWER

DIMENSION (MM)

MMCK-E2000

50-2000 *

35-70

H 80-220 W:40-200

220V50Hz 2.5KW

1700×1200×1900

MMCJ-E2000

50-2000 *

35-70

H 80-220 W:40-200

220V50Hz 2.5KW

1700×1200×1900

MMCF-E2000

50-2000 *

35-70

H 80-220 W:40-200

220V50Hz 2.5KW

1700×1200×1900

* Please Note:- machine packing speeds may differ to the actual machine speed due to raw materials flowability.

Summary

MODEL

TYPE

MMCK-E2000

FFS Granular packaging machine, volumetric cups (cup discharge on request)

MMCJ-E2000

FFS Paste packaging machine, thin type liquids on request

MMCY2-E2000

FFS Paste/Liquid packaging machine, thin type liquids on request

MMCF-E2000

FFS Powder packaging machine, special screw types on request